Concrete pump truck rental typically costs $300 to $1,200 in setup or minimum fees plus $150 to $500 per hour, depending on whether you use a line pump or a boom pump. A typical four-hour pour runs about $900 to $1,500 for a line pump and $1,250 to $3,200 for a boom pump.
Pump minimums usually include a set number of hours, commonly three to four, even if your pour finishes faster. Use the calculator below to estimate line and boom pump fees for your job size and pour duration.
Estimate concrete pump truck cost
Your pump cost estimate
| Component | Amount |
|---|---|
| Setup / minimum fee | - |
| Pumping time | - |
| Estimated pump total | - |
Request Local Provider Options
Enter your ZIP code or city to start a quote request. Provider availability is not guaranteed.
Concrete pump truck cost by type
| Pump type | Setup or minimum | Hourly rate |
|---|---|---|
| Line pump | $300 – $500 | $150 – $250 |
| Boom pump, 32m | $450 – $750 | $200 – $350 |
| Boom pump, 36m | $550 – $900 | $250 – $400 |
| Boom pump, 42m+ | $700 – $1,200 | $300 – $500 |
For a typical four-hour pour, expect to pay roughly $900 to $1,500 for a line pump, $1,250 to $2,150 for a 32-meter boom, $1,550 to $2,500 for a 36-meter boom, and $1,900 to $3,200 for a 42-meter or larger boom.
What affects the price
- Pump type and reach: boom pumps cost more than line pumps but reach farther and higher without dragging hose across the site.
- Minimum hours: most companies charge a three- or four-hour minimum, so short pours still pay the full minimum.
- Distance and access: long hose runs, difficult access, or a second truck to extend reach add time and fees.
- Location and season: rates vary by metro area and busy-season demand, with cold-weather pours sometimes adding surcharges.
What the estimate includes and does not include
The calculator covers pump setup and hourly fees for the pour. It does not include the concrete itself, delivery of the mix, the concrete crew, or cleanout and washout disposal, which are billed separately in most cases.
Frequently asked questions
Line pump vs. boom pump — which should I choose?
A line pump is cheaper and works well for ground-level or short pours where hose can be laid manually. A boom pump is worth the higher rate when you need long reach, height, or a truck-mounted arm that places concrete quickly over obstructions.
Is a concrete pump always needed?
No. Short, open pours where the truck can back up and discharge directly down the chute often need no pump at all. Pumps earn their cost on hard-to-reach, elevated, or long-distance placements.
Who arranges the pump — supplier or contractor?
Either the ready-mix supplier or your contractor can book the pump. It is often easiest to let the supplier coordinate it alongside the concrete delivery, but confirm who is responsible before pour day.
Are pump fees included in the concrete price?
Usually not. Pump rental is typically a separate line item from the concrete cost per yard, so ask for both figures when comparing quotes.
Related tools
Sources and update policy
Estimate transparency
How this estimate was prepared
- Prepared by
- GoHomeCost Cost Data Team
- Last reviewed
- August 24, 2026
- Update cycle
- Public price inputs checked monthly
Calculation method: Project quantity is multiplied by editable low, typical, and high unit rates. Selected location adjustments, waste, fixed charges, and minimum-job rules are then applied and shown in the result.
Public references used on this page:
This is a planning estimate, not a quote or structural specification. Check product yields, local code, site conditions, and written contractor bids before purchasing materials or building.
Read the full methodology Report a price or calculation issue