Estimate your concrete driveway
Calculated Cost Summary
Request Local Provider Options
Enter your ZIP code or city to start a quote request. Provider availability is not guaranteed.
Range breakdown
| Component | Low | Average | High |
|---|---|---|---|
| Plain installation | - | - | - |
| Thickness adjustment | - | - | - |
| Finish adjustment | - | - | - |
| Reinforcement allowance | - | - | - |
| Preparation and project type | - | - | - |
| Calculated subtotal | - | - | - |
Concrete driveway cost per square foot
A plain concrete driveway typically costs $6 to $10 per square foot installed, with decorative finishes, heavier reinforcement, demolition, and difficult access pushing the price higher. The calculator below starts with editable installed rates and applies visible allowances for thickness, finish, reinforcement, preparation, and removal.
Concrete driveway cost by size
| Driveway | Typical size | Typical range |
|---|---|---|
| Single-car parking pad | 10 x 20 ft (200 sq ft) | $1,200 – $2,600 |
| Two-car parking pad | 20 x 24 ft (480 sq ft) | $2,900 – $6,200 |
| Single-car approach | 12 x 40 ft (480 sq ft) | $2,900 – $6,200 |
| Two-car approach | 20 x 40 ft (800 sq ft) | $4,800 – $10,400 |
What this estimate includes
The starting installation rate represents forming, a compacted base, ready-mix concrete, placement, and a plain finish. Drainage structures, permits, engineering, snow-melt systems, retaining work, and unusual site access should be priced separately.
New driveway vs. replacement
Replacement adds demolition, loading, disposal, and often extra base work. Those costs remain visible as a separate project-type adjustment instead of being hidden inside the concrete rate.
How much concrete does a driveway need?
Concrete volume equals length multiplied by width multiplied by slab thickness. The calculator converts the result to cubic yards and adds the selected waste allowance. Confirm the final order with the ready-mix supplier.
Before accepting a quote
- Confirm slab thickness and concrete strength.
- Ask whether base preparation and compaction are included.
- Confirm reinforcement, control joints, drainage, curing, and sealing.
- Make sure demolition, disposal, permits, and cleanup are listed separately.
Frequently asked questions
How much does a concrete driveway cost per square foot?
A plain concrete driveway costs $6 to $10 per square foot installed. Stamped or colored finishes add $5 to $11 per square foot, and replacements add $2 to $6 per square foot for demolition.
How thick should a concrete driveway be?
Four inches is a common planning assumption for passenger vehicles, while heavier vehicles or poor site conditions may require more. The final design depends on loads, soil, base preparation, drainage, concrete strength, reinforcement, climate, and local requirements.
Does a concrete driveway need rebar?
Rebar, welded wire reinforcement, or other crack-control measures may be specified depending on the slab and site. Reinforcement does not replace a stable, compacted base or properly planned joints. Keep the allowance visible, then confirm the actual specification locally.
How long does a concrete driveway last?
A properly installed concrete driveway lasts 25 to 50 years with basic maintenance such as sealing and joint care.
Related tools
- Concrete price per yard – material and delivery costs
- Concrete slab cost calculator – flatwork estimates
- Rebar calculator – reinforcement quantities
Sources and update policy
Estimate transparency
How this estimate was prepared
- Prepared by
- GoHomeCost Cost Data Team
- Last reviewed
- August 24, 2026
- Update cycle
- Public price inputs checked monthly
Calculation method: Project quantity is multiplied by editable low, typical, and high unit rates. Selected location adjustments, waste, fixed charges, and minimum-job rules are then applied and shown in the result.
Public references used on this page:
This is a planning estimate, not a quote or structural specification. Check product yields, local code, site conditions, and written contractor bids before purchasing materials or building.
Read the full methodology Report a price or calculation issue